An easy way to independently pramok Tembok
Maybe some of us are still wondering, what is the wall pramir? Basically, wall pramir is a pre-painted wall covering. Plumir on the wall is a white liquid, usually a mixture of calcium, glue and water.
The Plumir wall itself usually acts to smooth the surface of textured, hollow, or uneven walls. Plamiring the wall facilitates the painting process and improves the appearance of the wall.
In fact, you can fill the wall yourself without any problems if you have the right method, without using professional services. strange? Now see the steps below!
1. Clean the wall first!
This first step is intended to allow the Plumir to adhere completely, as dirt and dust on the wall can reduce the adhesive strength of the Plumil on the wall. In addition, the texture of dust and dirt makes the wall surface uneven.
If the wall is already painted, you need to first remove the old paint to make the next painting process more perfect without residue.
2. Preparation of wall pramir
You can get the wall pramir material in two ways: you can make it yourself or you can buy it at a building material store. You can make wall pramir by mixing calcium, glue and water in a certain ratio. White cement may be used instead of calcium, but this is not recommended.
Second, you can use wall plummers on the market and you don't have to bother to make yourself. In addition to reducing the risk of breakdowns in the manufacturing process, wall decorations sold in construction stores are also relatively affordable.
3. Apply wall pramir
This is the most core process, applying the wall pramir itself. Pour Plumir into a container for ease of use. Use kape, a type of tool for scraping dry paint. This is an iron base whose main part is triangular.
Apply the Plumir solution from the top to the bottom of the wall so that the results of the Plumir are flat and tidy. Make sure the pores in the wall are completely closed.
4. Dry the Pramir Tenbok
Once the wall plumil application process is complete, just wait for the plumil to dry. This process typically takes 24 hours to ensure that the Plumir is fully installed.
5. Sanding dining
The walls, coated with Plumir and dried for 24 hours, are ready for the next process, sanding. Choose sandpaper with a smoother texture so that the dry sandpaper does not come off due to the coarse sandpaper.
Gently rub the sandpaper against the wall without rubbing it too hard, polishing the entire wall coated with Plumir. This is intended to make the final Pramir better and more uniform.
6. Confirmation of final result
This final process aims to double-check that the surface of the wall is flat and there are no more holes that are not completely covered. In addition, make sure the texture of the wall is smooth or still wavy, reducing its beauty.
If the final result is not good, you can repeat the wall pramir process in the unorganized areas.
7. Ready to start mural!
After performing all the steps of the mural correctly and successfully, you can do the mural immediately. Of course, the walls coated with Plumir are easy to paint and can produce bright colors.
So, after knowing the steps to plumia the walls yourself, are you interested in doing them? Remember to follow the instructions on the Plumir packaging before using.
If you're looking for minimalist furniture and decorations that will add to the mood of your home, you can find them at Decorma. Decorma sells minimalist sofas, TV tables and wardrobes to shoe racks of various models and sizes.
As well as furniture, there are different types of mattresses to suit your sleeping needs. Dekoruma, of course, sells the highest quality Serta and Dunlopillo mattresses. Complete your housing needs with Decorma!
Source : http://i0.wp.com/www.dekoruma.com/artikel/71063/cara-plamir-tembok-sendiri
Read More..
digitalboc.blogspot.comcolinelovecat.blogspot.com
houseplans99.blogspot.com